System Hardware
Required —
Host Bus —
Host Interface — 32-bit, 33-Mhz busmaster DMA
Host Data Rate — Data transfer at burst rates up to 133 MB/second
Port Used —
Other Hardware
Resources Used— Plug-and-Play compatible; automatically self-configures
Cable
Required —
Compliance —
Device
Interface —
Data Rate —
Maximum
Distance —
User Controls — (1) Board-mounted jumper for forcing termination;
1. Specifications
IBM PC compatible computer with at least one available
PCI slot
PCI 2.1
None (does not occupy any COM or LPT port)
interrupt, I/O address, BIOS address, etc.
High-quality double-shielded
CE (EN 50081-1, 50082-1); FCC Class B, IC Class/classe B
Both internal and external: Ultra2 Wide SCSI (LVD/SE);
backward-compatible with Ultra2 Narrow SCSI and Wide
and Narrow single-ended Ultra SCSI, SCSI-3, SCSI-2, and
SCSI-1
Up to 80 megabytes per second in Ultra2 Wide mode;
Up to 40 megabytes per second in Ultra Wide mode;
Up to 20 megabytes per second in Fast Wide mode
See Section 3.3
Firmware configuration utility;
Driver software
CHAPTER 1: Specifications
9