Table of Contents
Advertisement
aULTRA2 LVD SCSI HOST ADAPTERNAME
5.2.6 U
PDATING THE
Take these steps to update the driver if you have an older version of it installed in
your Windows 95b system:
1. Once a Windows 95 session is established, start from the desktop and use your
installed mouse or the appropriate keystrokes to select these items one after
the other (each item contains the next in sequence): "My Computer,"
"Control Panel," "System," "Device Manager" tab, "SCSI Controllers" category,
"Initio INI-A100U2W PCI SCSI Controller."
2. In the "IN-A100U2W SCSI Controller Properties" window, select the "Driver"
tab, then select "Update Driver..."
3. Insert Driver Disk 1 into drive A:, then click "Next."
4. Select "Other Location." Enter the pathname of the Windows 95 driver's
directory ("A:\WIN95") and select "OK".
5. Select "Finish." When the "Insert disk labeled IN-A100U2W Driver Disk 1"
window appears, select "OK."
6. A "Copying file" window will appear. Replace the highlighted directory
pathname with "A:\WIN95" and select "OK".
7. This completes updating the Ultra2 LVD SCSI Host Adapter's device driver.
Reboot the system to activate the updated driver.
8. We highly recommend that you verify that the new version of the device
driver has been properly installed by starting at the desktop and selecting
these items one after the other (each item contains the next in sequence):
"My Computer," "Control Panel," "System," "Device Manager" tab, "SCSI
Controllers" category, "Initio INI-A100U2W PCI SCSI Controller." If "This
device is working properly" is displayed on your screen, the driver has been
correctly installed.
50
W
95 D
INDOWS
RIVER IN
W
95
(OSR2)
INDOWS
B
Advertisement
Table of Contents
