Chapter 4 Creating Labels Using The General Id Menu; Creating A Basic Label - Brady IDXPERT User Manual

Chapter 5
Creating Labels Using the General ID Menu
This chapter provides information for creating, formatting and printing labels using the General ID
Menu, including information on changing font sizes and bold status. It also provides instructions for
adding symbols and international characters to a label.

Creating a Basic Label

Follow these steps to create and print a basic label. For details and information on advanced features,
refer to the chapters that follow in this manual.
Note: See the IDXPERT
instructions on creating a variety of labels.
Step 1. Press
POWER
Step 2. Press
ENTER
Step 3. Press
FONT SIZE
The display screen shows the
current font size, bold status,
and auto size status.
Note: See Appendix C—Font Size Chart to view available font sizes.
Step 4. Use the up/down arrow softkeys, or the arrows on
your keypad to select a font size.
Step 5. Press the
BOLD
Step 6. Press the
AUTO
Step 7. Press .
ENTER
Step 8. Type desired text and/or characters.
Press to add additional lines of text and/or characters.
ENTER
Note: You may also select from a list of symbols to include on your label.
See Appendix D—Symbol Library to view selection.
Step 9. Press . For multiple copies, press
PRINT
+
FUNCTION PRINT/MULTI-PRINT
Step 10. Pull the cutter lever down to cut the label.
Note: If you press
ID Menu, the following options appear on the display screen:
User Manual
Handheld Labeler Sample Label Tutorial for step-by-step
TM
.
to select the General ID Menu (highlighted by default).
.
FONT: 10 pt
Bold: OFF
Auto Size: OFF
softkey to toggle bold ON or OFF.
softkey to toggle auto sizing ON or OFF.
.
+
FUNCTION CLEAR/ESC
[▲] [▼]
while creating labels using the General
15