Brady IDXPERT User Manual page 30

Patch Panel Display Screen
Step 6. Enter the desired label data and do one of the following:
• Press the
ENTER
• Press
FUNCTION
Step 7. Use the
PREV ZONE
Patch panels can be viewed the same as if they were one large label.
Note also the following:
• You can create up to 12 zones per label.
• Font sizes can differ on a line-by-line and zone-by-zone basis. Rotation can also be
changed on a zone-by-zone basis.
• One zone (or port) is viewed at a time (creation of a maximum of 12 zones is possible;
when the label is recalled from memory, the first zone created appears).
• The example below shows a Patch Panel label that utilizes 12 zones with the first of
the 12 zones shown:
Step 8. Press . The label will feed to the cut position.
PRINT
Lines print so that both the start and end lines show. See example:
" unprintable space
1/16
at beginning of label
After printing, the display screen returns to displaying the label text in the DataComm
& T-Block Menu.
24
key to begin a second line, or
+ to move to a new zone (port).
CREATE ZONE
and keys to scroll through the zones created for the label.
NEXT ZONE
User Manual