Table of Contents
Advertisement
2. Charge for 2.5 hours. The battery status lights pulse while charging. When all four lights are
green and stop pulsing, the battery is fully charged. For detailed status information see
"Battery Status" on page
Power On
To turn the printer on or off:
1. Press and hold the power button for one second.
Automatic Shut Down
To conserve battery charge, the printer automatically turns off after a period of inactivity. Use the
Express Labels mobile app to set the inactive time, see
Force Restart
To force the printer to restart if it becomes unresponsive, hold the power button down for fifteen
seconds. The battery and Bluetooth lights will come on when the printer has restarted.
Software for Creating Labels
Install labeling software on your computer or mobile device, set up the connection to the printer, then
use the software to design labels and send them to the printer. (Refer to your local Brady website for
other Brady software. Be aware that older Brady labeling software may not automatically detect the
printer and that the information in this manual is based on the software listed below.)
•
Use the Brady Express Labels app on a mobile device.
•
Use Brady Workstation software on a desktop or laptop computer.
Mobile Device
The mobile device operating system must be one of the following:
•
Android 6.0 or higher
•
Apple iOS 10.0 or higher
M511 User Manual
24.
"Shutdown" on page
Setup
Software for Creating Labels
14.
11
Advertisement
Table of Contents
