Chapter 10
Maintenance
This chapter provides instructions on cleaning your IDXPERT
an accessory parts list.
Cleaning
Follow these instructions to keep your printer running at optimal performance.
Step 1.
Remove label cartridge.
Step 2.
Use a cotton swab moistened with isopropyl alcohol and thoroughly wipe the following:
WARNING: Use a foam swab (with black handle) provided in your cleaning kit. See
the Accessories Parts List on page 47.
WARNING: Wait five minutes after cleaning so the printer is dry before installing a
cartridge.
a. Print head—Try cleaning the print head with a dry swab first. Wipe the print line
(black) area only. Do not wipe the green area.
b. Label exit slot—Wipe the breaker bar located on the inside of the label exit slot. The
cutter blade meets the breaker bar when a label is cut.
c. Deflector plate—This is located above the print head, to the right of the platen roller.
See the illustration on the following page.
46
Handheld Labeler. It also includes
TM
User Manual