Table of Contents
Advertisement
Chapter 3
Getting Started
This chapter provides instructions on setting up your IDXPERT
a basic label. Refer to the following chapter for details on how to use the keypad and menu.
Setting up the printer
Follow these steps to set up your printer prior to creating your first label.
Step 1.
Install batteries or connect to power.
Insert six AA alkaline batteries (not included).
1. Remove the battery cover located on the backside of the printer.
2. Install the batteries as shown. See inside the battery compartment for the battery-
positioning grid.
3. Close the battery compartment.
ABC Keypad Version
Note: You can print up to 650 labels between battery changes.
The IDXPERT
Handheld Labeler can also be powered by use of an A/C Power Supply. See the
TM
section on Connections on page 5.
Step 2. Replace material cartridge.
Note: Cut off any excess label material before removing an existing cartridge.
Your printer ships with a cartridge installed. Follow these instructions to replace the existing
cartridge.
1. Turn the locking lever down to unlock the
cartridge.
2. Locate the cartridge release button on the
backside of the printer and push firmly to
eject cartridge.
3. Remove the existing cartridge.
4. Install the new cartridge as shown.
5. Turn the locking lever up to lock both the
cartridge and print head.
Step 3. Turn the printer ON.
Press the POWER key.
User Manual
Battery
Cover
Keyboard Layout Version
Handheld Labeler and creating
TM
Locking Lever
7
Hide quick links:
Advertisement
Table of Contents
