Table of Contents
Advertisement
Barcode Labels
The printer allows you to print Code 39 and Code 128 barcode labels (while in General ID Menu
mode). Barcode heights are available in inches or millimeters. See Setting Units on page 36 for
instruction on setting units to inches or millimeters. Barcodes are selectable on a line-by-line basis.
Text and barcodes cannot be combined on the same line.
Step 1.
Press
.
MENU
Step 2. Press
to navigate to and then press the
NEXT
• SYMB (Symbology)
Select 39 (check digit on/off), or 128.
• HGT (Barcode Height)
Range is from .1" to 1.2"
Pressing the
in .1" increments.
• HR (Human Readable)
Select
,
ON
(SIZE provides font size options of 4pt., 6pt., 7pt., and 10pt.)
HR default font size = 10 pts
HR text is centered and positioned below the barcode.
• WIDTH (Barcode Width)
Available barcode widths are 2 dots and 3 dots.
Default barcode width is 3 dots.
• Pressing
FUNCTION
Step 3. After you complete selecting barcode formatting and entering data, press
The barcode will print with the human readable text centered below it.
Note: There are some data types such as symbols that cannot be entered or printed while
in barcode mode. If you try to enter this type of information while in barcode mode, you
will receive this error message: "Cannot Fit"
42
A barcode symbol in the status
bar (on the display screen)
indicates that a line is
designated as a barcode.
up/down) softkey arrows raises and lowers barcode height
[▲] [▼] (
, or
.
OFF
SIZE
+
on the keypad toggles between text and barcode modes.
BARCODE
softkey. The following options appear:
BAR
.
ENTER
User Manual
Hide quick links:
Advertisement
Table of Contents
