Getting Started; Entering Text; Editing Text; Inserting Text - Brady BBP 35 User Manual

Getting Started

This section describes the process of creating a text label with minimal formatting, using basic
editing techniques, and printing the label.

Entering Text

When the printer is first turned on, you are presented with the Home page, displaying a
blinking vertical bar (the cursor) and the message "Type or touch here..."
The cursor is the starting point for every label you create using the BBP
Using the keyboard, begin entering text at the position of the cursor. The opening message will
disappear and your entered text displays on the screen, surrounded by a frame. The frame
indicates you are working with a text object. (See
objects.) The cursor moves across the screen as you enter data. If you want another line of text,
press [ENTER] on the keyboard.

Editing Text

If you have entered some text in error or want to change the content or format of your label,
edit the information before printing.

Inserting Text

To insert additional text within a line of text:
Touch the screen at the point where text should be inserted.
1.
OR
Using the navigation arrows on the keyboard, position the cursor where text should be
inserted.
Enter the text.
2.
Existing data positioned to the right of the cursor moves progressively to the right to make
room for the inserted text.
If a fixed font size is selected, when the end of the line is reached, no more data can be
inserted. To add more data, press [ENTER] on the keyboard to start another line of text. If
Autosizing is invoked, the font size decreases as more data is entered. (See Auto Size on
page 35.)
Rev A
page 38 for more information about
31
Getting Started
®
35/37 Label Printer.
®
BBP 35/37 User's Manual