PROGRAM THE THERMOSTAT (T12500 MODELS ONLY)
PROGRAM THE THERMOSTAT (T12500 MODELS ONLY)
PROGRAM THE THERMOSTAT (T12500 MODELS ONLY)
Each day has two or four scheduled events (Occupied1, Occupied2, Unocc1, and Unocc2)
per day, depending on Service Menu configuration. Each event can be programmed with a
start time and Heat and Cool Setpoints. Heat Setpoint controls system heating during cold
weather. Cool Setpoint controls system cooling during hot weather. The T12000 Series is
preprogrammed with factory default settings for seven days of the week as follows:
Time Period
Occupied1
Unocc1
Occupied2
Unocc2
i
Note: To change the preprogrammed times and/or setpoint temperatures, follow the
instructions under "Program scheduled events."
i
Note
See Service Menu 240 to enable two or four scheduled events per day.
:
Start Time
8:00 am
10:00 pm
—
—
Heat Setpoint
Temperature
70° F (21° C)
55° F (10° C)
—
—
Cool Setpoint
Temperature
75° F (24.0° C)
85° F (29.5° C)
—
—
16