CUSTom PRogRam (ConT.)
MTUWTHF
i
note: After the Day/Group of Days
are selected, each time period must be
programmed for the start time as well as
the Heat and Cool Setpoints.
6. Press ▲or ▼to scroll through the four time
periods (WaKe, Day, eVe, and SleeP).
Select the time period to be programmed and
press PROG once.
7. Press ▲or ▼to scroll to the desired
starting hour. Press PROG once.
8. Press ▲or ▼to scroll to the desired
SET
starting minute. Press PROG once.
9. Press ▲or ▼to scroll to the desired Heat
Setpoint Temperature. Press PROG once.
10. Press ▲or ▼to scroll to the desired Cool
Setpoint Temperature. Press PROG once.
After you complete this process, the T2500 will
return to the default Display.
Repeat steps 7 through 10 for
remaining day(s) and time periods.
19