The T2500 Display Menus - Peco WavePRO T2500 Operating Manual

The T2500 DiSPlay menUS

System mode Display
1
HEAT – Indicates the system is in heating mode.
COOL – Indicates the system is in cooling mode.
AUTO – Indicates the system will automatically changeover between heating and cooling
modes as the room temperature varies.
OFF – Turns off the entire system.
SETBACK – Indicates the heating or cooling system is operating in manual setback mode.
(To appear, SETBACK must be selected in "Advanced configuration." See the "PECO
WavePRO Wireless System Installation Guide").
Temperature Display
2
Default display: Digits display the current room temperature.
During programming: Digits are used to set the desired temperatures format.
Time & Day Display
3
Default display: Digits indicate the current time.
Day abbreviations indicate the current day. During programming: Digits and days are used
to program time periods.
CLOCK – Lights up during programming when the clock is being set.
24Hr – Lights up during programming to indicate time will be displayed in 24-hour clock
11