Peco WavePRO T2500 Operating Manual page 23

oVeRRiDing The PRogRam (ConT.)
After you enter the HOLD submenu, press
▲or ▼and scroll until "off" is flashing.
Setting up a Permanent Hold:
1. Press PROG once.
2. Press ▲or ▼to scroll until "HOLD" is
flashing. To select, press PROG once.
3. Press ▲or ▼to scroll to "ON". To select,
press PROG once.
note: The thermostat is now on hold until you
manually turn off the hold.
HOLD
Turning off a Hold:
1. Press PROG once.
2. Press ▲or ▼to scroll until "HOLD" is
flashing. To select, press PROG once.
3. Press ▲or ▼to scroll to "OFF". To select,
press PROG once.
note: The thermostat will now resume your
programmed time and temperature settings.
23