Sending A Fax Manually; Out Of Memory Message - Oce fx3000 User Manual

Sending a fax manually

Manual transmission
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
a
Make sure you are in Fax mode
b
Load your document.
c
Press Monitor and listen for a dial tone.
Or pick up the handset of the external
phone and listen for a dial tone.
d
Dial the fax number you want to call.
e
When you hear the fax tone, press
Start.
Sending a fax at the end of a
conversation
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Make sure you are in Fax mode
c
Load your document.
d
Press Start.

Out of Memory message

5
If you get an Out of Memory message while
scanning the first page of a fax, press Stop to
5
cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Start to send the
.
pages scanned so far, or to press Stop to
cancel the operation
Note
If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real time transmission on page 36.)
5
.
Sending a fax
5
5
39