Oce fx3000 User Manual page 122

Error Message Cause
The machine's memory is full.
Out of Memory
The output tray is full of paper.
Output tray
Full
The paper is jammed in the back of
Paper Jam
the machine.
Back
The paper is jammed in the duplex
Paper Jam
tray.
Duplex
The paper is jammed inside the
Paper Jam
machine.
Inside
The paper is jammed in the MP tray
Paper Jam
of the machine.
MPTray
The paper is jammed in the paper
Paper Jam
tray of the machine.
Tray1
Paper Jam
Tray2
It is time to replace the fuser unit.
Replace Fuser
It is time to replace the laser unit.
Replace Laser
It is time to replace the paper
Replace PF
feeding kit for the Upper Tray.
Kit1
It is time to replace the paper
Replace PF
feeding kit for the optional Lower
Kit2
Tray.
It is time to replace the paper
Replace PF
feeding kit for the MP tray.
KitMP
114
Action
Fax sending or copy operation in progress
Do one of the following:
Press Start to send or copy the scanned
pages.
Press Stop and wait until the other
operations in progress finish, and then try
again.
Clear the data from the memory. (See Out of
Memory message on page 39 or page 82.)
Printing operation in process
Do one of the following:
Reduce print resolution. (See Advanced tab
in the Software User's Guide on the
CD-ROM.)
Clear the faxes from the memory. (See Out
of Memory message on page 82.)
Remove the paper from the output tray.
See Paper jams on page 118.
See Paper jams on page 118.
See Paper jams on page 118.
See Paper jams on page 118.
See Paper jams on page 118.
Call Océ Imagistics Authorized Service Center
to replace the fuser unit.
Call Océ Imagistics Authorized Service Center
to replace the laser unit.
Call Océ Imagistics Authorized Service Center
to replace the PF Kit 1.
Call Océ Imagistics Authorized Service Center
to replace the PF Kit 2.
Call Océ Imagistics Authorized Service Center
to replace the PF Kit MP.