Fault Messages In The Display - Miele Polaris Operating Instructions Manual

Problem solving guide

Fault messages in the display

Problem
! lights up in the dis-
play and
Drain fault
flashes.
lights up in the dis-
!
play and
Water inlet
fault
flashes.
lights up in the dis-
!
play and
Waterproof
fault
flashes.
lights up in the dis-
!
play and
Technical
fault
flashes.
Anti-crease
Chk detergent
flashes in the display.
A To switch off the fault message: Switch the machine off with I-On/0-Off button.
34
Possible cause
– The water outlet is
blocked or restric-
ted.
– The drain hose has
been fixed too high.
– The water inlet is
blocked or restric-
ted.
The water protection
system has reacted.
There is a fault.
Excessive foam has
built up during was-
hing.
Remedy A
– Clean the drain filter and
the drain pump.
– The maximum delivery
head is 1 m.
Check whether
– the stopcock is opened
properly.
– the inlet hose is kinked.
Call the Service Department.
Start the programme again.
If the fault message appears
again, contact the Service
Department.
Use less detergent next time
and follow the manufacturer's
instructions on dosage given
on the packaging.