Miele Polaris Operating Instructions Manual page 23

This machine has fully electronic con-
trols with automatic load recognition. It
takes in the right amount of water requi-
red for the programme depending on
the amount of laundry and its absor-
bency rate. This means that program-
me cycles and durations can vary.
The programme sequences outlined in
the chart are based on the basic pro-
gramme with a full load. Extra options
which can be selected have not been
taken into account.
The display shows the stage the pro-
gramme has reached.
Programme sequence
Special features in the programme
sequences:
Anti-crease:
At the end of every programme, with
the exception of the Woollens program-
me, the drum continues to turn at inter-
vals for up to 30 minutes to help pre-
vent creasing. The door can be opened
and laundry removed at any time du-
ring the anti-crease phase.
1)
A second rinse is carried out when a
temperature of 60°C to 95°C has
been selected. A third rinse is car-
ried out when a temperature below
60°C is selected.
A third/fourth rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
– No u has been selected
2)
A third rinse is carried out if:
No u has been selected
23