These are stereo-type effects that use two chorus units. They're an effective way to add
spaciousness and depth to any type of sound: piano, strings, brass, etc.
19: Chorus 1
In this chorus effect, the left channel
modulation signal is out of phase with the
right channel modulation signal. This
produces a wide stereo chorus effect.
20: Chorus 2
In this chorus effect, left and right channel
modulation signals are in phase.
17A Chorus 1XXXø
Delay Time (D.Time)
Mod Depth (Mod)
Mod Speed (M.SP)
EQ Low (EQ.L)
EQ High (H)
For effects 19 and 20, dynamic modulation (16C) can be used to control the DRY:EFF balance.
The EQ part of these effects is active even when the Effect is switched off (16A). To bypass these
effects completely, select 0:No Effect.
17B Chorus 1XXXø
Modulation waveform type
Low EQ cut and boost
High EQ cut and boost