Table of Contents
Advertisement
82
Appendix E: Installing and Using the Command Line Utility
●
hrconf getversion
Returns the version information for all controllers or the optionally specified controller.
Syntax
hrconf getversion
Parameters
Optional controller# prints the version information for the specified controller
Example
hrconf getversion
Return values
SUCCESS: 0x00
hrconf rescan
Enables the controller to check for the removal of any disk drives in the ready state, and to
check for the connection of any new disk drives to the controller. The command returns when
the rescan is complete.
Syntax
hrconf rescan <Controller#>
Parameters
Controller# is the controller number
Example
hrconf rescan 1
Return values
SUCCESS: 0x00 indicates the command completed successfully
FAILURE: 0x01 indicates the command failed
Advertisement
Table of Contents
