From the command prompt, type
2
prompt, type:
xx_yy_zz:\netware\manager\install
where
is the product CD,
xx
example:
adptcd_v2_01
The installation program starts.
Follow the on-screen instructions to complete the installation.
Starting the Command Line Utility
To start HRCONF, enter one of the following commands:
Windows—
●
Linux—
●
/usr/StorMan/<name of utility>
NetWare—
●
Install_dir*
HRCONF.
To see a list of available commands, type HRCONF at the prompt. The utility command
functions are detailed in
Using the Command Line Utility
This section explains how to use the command line utility interactively or in batch mode. With
interactive mode, enter commands at the prompt. In batch mode, create scripts and run the
script in the appropriate shell. For example:
Environment
Windows
Linux
In either mode, if your command fails, you immediately see an error message of Command
failed. Other script messages that you can get are Command completed successfully, or
Command aborted.
Available commands are described on the following pages, in alphabetical order.
Appendix E: Installing and Using the Command Line Utility
load cdrom
is the version number, and
yy
c:\<install_dir*>\<name of utility>.exe
load <name of utility>
is the directory where the utility is installed and
Using the Command Line Utility
Batch File
.bat
.sh
and press Enter. From the command
is the release number. For
zz
name of utility
(see next section.)
Run Script
CMD.EXE
sh / bash
78
●
is