Table of Contents
Advertisement
Parameters
Controller# is the controller number
Options indicates the logical drive with the following options:
Stripesize—Optional parameters for specifying a stripe size. STRIPE is specified in
●
kilobytes: 16, 32, and 64 are supported.
Name—Optional parameter for specifying the name of the logical drive to be created.
●
Init_Priority—Initialization Priority for logical drive to be created. Valid parameters are
●
either HIGH, MED, or LOW.
Init_Method—Initialization method for the logical drive. Valid options include: CLEAR,
●
QUICK.
Size indicates the size of the logical drive. MAX is the only size option available.
RAID# indicates the RAID level for the logical drive (0, 1, 10 volume).
Channel# is the channel number for the device.
Drive# is the device number for the device.
noprompt: No prompt for confirmation.
Example
hrconf create 1 logicaldrive stripesize 64 max 0 1 0 1 1 1 2
Return values
SUCCESS: 0x00 successful termination
FAILURE: 0x00 bad arguments or internal error
hrconf delete
Deletes a logical drive. All data stored on the logical drive will be lost. Spanned drives can't be
deleted with this function.
Syntax
hrconf delete <Controller#> LOGICALDRIVE <LogicalDrive#> [noprompt]
Parameters
Controller# is the controller number
LogicalDrive# is the number of the logical drive to be deleted
noprompt: No prompt for confirmation
Example
hrconf delete 1 logicaldrive 1 noprompt
Return values
SUCCESS: 0x00 successful termination
FAILURE: 0x01 bad arguments or internal error
Appendix E: Installing and Using the Command Line Utility
80
●
Advertisement
Table of Contents
