Kit Contents
Adaptec SAS HostRAID controller
●
HostRAID Installation CD (bootable), including controller drivers, and this Guide
●
Adaptec Storage Manager Installation CD (not bootable), including user guides for
●
Adaptec Storage Manager and the Adaptec HRCONF (HostRAID Configuration)
command line utility
Readme Files
●
Cables (type and quantity vary for cable information about your HostRAID controller, see
●
About Your HostRAID Controller on page
Low-profile bracket (Selected models only)
●
Serial Attached SCSI 58300, 48300, 44300 HostRAID Controllers Quick Start Guide
●
System Requirements
PC-compatible computer with Intel Pentium, or equivalent, processor
●
A motherboard with these features:
●
Complies with the PCI Local Bus Specification, Revision 2.2 and higher.
●
Supports multifunction devices where one of the devices is a PCI bridge.
●
Large memory-mapped address ranges.
●
One of these operating systems:
●
Microsoft® Windows®2000, Server 2003, XP
●
Red Hat Linux
●
SuSE Linux
●
Novell® NetWare®
●
Note:
at www.adaptec.com.
At least 256 MB (or more) of RAM
●
An available 3.3V 32 or 64-bit PCI 2.2 or 3.3V PCI-X 133 slot
●
40 MB of free drive space
●
16-bit SVGA color monitor with a resolution of at least 800 x 600
●
CD drive (that is not part of the HostRAID you are installing)
●
SAS interface cables
●
Chapter 3: Kit Contents and System Requirements
For up-to-date operating system version support, refer to the Adaptec Web Site
13)
19
●