hrconf getconfig
Lists information about the controllers, logical drives, and physical drives. This information
can include (but is not limited to) the following items:
Controller type
●
Logical drive status, RAID level, and size
●
Physical drive type, device ID, presence of PFA
●
Physical drive state
●
Syntax
hrconf getconfig <Controller#> [AD/LD/PD/AL]
Parameters
Controller# is the controller number
AD/LD/PD/AL options:
AD—Adapter information only
●
LD—Logical drive information only
●
PD—Physical device information only
●
AL—All information (optional)
●
Example
hrconf getconfig 1 ad
Return values
SUCCESS: 0x00 successful termination
FAILURE: 0x01 bad arguments or internal error
hrconf getstatus
The
function displays the status of any background command that is currently
GETSTATUS
running.
Syntax
hrconf getstatus <Controller#>
Parameters
Controller# is the controller number
Example
hrconf getstatus 1
Return values
SUCCESS: 0x00 successful termination
FAILURE: 0x01 bad arguments or internal error
Appendix E: Installing and Using the Command Line Utility
81
●