Installing On Windows; Installing On Windows Server 2003 Or Windows Xp; Installing With Windows Server 2008, Windows 7, Or Windows Vista; Installing On Red Hat Or Suse Linux - Adaptec 3405 Installation And User Manual

Installing on Windows

Follow the instructions in this section for your version of Windows.

Installing on Windows Server 2003 or Windows XP

To install the driver on Windows:
Start or restart Windows.
1
The Found New Hardware Wizard opens and searches for the driver.
Insert the driver disk, select Floppy drive, then click Next.
2
Click Next, then click Next again.
3
Follow the on-screen instructions to complete the driver installation.
4
Remove the driver disk and restart your computer.
5
Continue with
6

Installing with Windows Server 2008, Windows 7, or Windows Vista

Start or restart Windows.
1
The Found New Hardware Wizard opens and searches for the driver.
Insert the driver disk, then select Locate and Install Driver Software.... and Don't Search
2
Online.
Click Next, then click Close.
3
When the installation is complete, remove the driver disk and restart your computer.
4
Continue with
5

Installing on Red Hat or SUSE Linux

To install the module on Red Hat or SUSE Linux:
Insert and mount the RAID Controller Installation CD:
1
Red Hat: mount /dev/cdrom /mnt/cdrom
SUSE:
mount /dev/cdrom /media/cdrom
Install the module RPM:
2
rpm -Uvh mount-point/xxx/yyy.rpm
where
mount-point
and
yyy.rpm
Reboot your computer to ensure the driver loaded correctly.
3
Run fdisk, mkfs, and create mount points for any new disk drives.
4
Continue with
5
Chapter 8: Installing the Driver on an Existing Operating System
Managing Your Storage Space on page
Managing Your Storage Space on page
is the specific mount point on the Linux system,
is the rpm file.
Managing Your Storage Space on page
67.
67.
is the driver path,
xxx
67.
64
●