Table of Contents
Advertisement
Installing on Windows Vista or Windows Server 2008
1
Insert the Windows setup CD.
2
Right-click the Computer and select Manage.
3
From the Computer Management, select Device Manager to open the list.
4
Under Other Devices, select SAS Controller.
5
Right-click SAS Controller and select Update Driver Software.
6
Browse the installation path of the driver and click Next.
7
Once the installation is complete a message appears "Windows has finished installing the
driver software for this device".
Installing on Red Hat or SUSE Linux Enterprise Server
To install the module on Red Hat or SUSE Linux Enterprise Server:
1
Insert and mount the Installation CD:
Red Hat—mount /dev/cdrom /mnt/cdrom
SuSE—mount /dev/cdrom /media/cdrom
2
Install the module RPM:
rpm -ivh mount-point/xxx/yyy.rpm
where
mount-point
and
yyy.rpm
3
Once the installation is complete, verify if the adpinv.ko is available in the following
location.
/lib/modules/current-kernel/kernel/drivers/scsi
4
Now restart the system to successfully load the driver packages.
Chapter 6: Installing the Driver on an Existing Operating System
is the specific mount point on the Linux system,
is the rpm file.
l 29
is the driver path,
xxx
Advertisement
Table of Contents
