Lucent Technologies PARTNER Advanced Communications System System Planner Manual page 36

Template Instructions
•
If desired, write in line number, pool access code
•
If desired, write in Line Ringing (Imm, Del, or No) from Form B2
•
If desired, write in Line Access Restriction or Pool Access Restriction
(Out, In, or No) from Form B2
† Available with ACS R2.0 or later only.
Intercom Intercom
* In Hybrid mode only, if pool 880 is assigned, these two buttons are associated with this pool.
(ACS R2.0 or later only)
Specify Automatic Line Selection: ________________________________________________________________
Identify extensions programmed as shown: ___________________________________________________
†
, dial code feature, or auto dial number
†
Ext.
Form C8: MLS-6 Phone
Make as many copies as you need. Use template and/or checklist.
For additional instructions, see page 8.
Also write in extension or group number
SAMPLE
Do Not Disturb (F 01)
04
Privacy (F 07)
DEL
VMS Cover (F 15)
IN
Voice Interrupt on Busy Talk-Back (F 18)
Account Code Entry (F 12)
Background Music (F 19)
Call Coverage (F 20 XX XX)
Call Forwarding/Call Follow-Me (F 11 XX XX)
Call Park (I XX )
Call Pickup (I 6 XX)
Conference Drop (F 06)
Contact Closure 1 (F 41)
Contact Closure 2 (F 42)
Direct Line Pickup-Active Line (I 68)
Direct Line Pickup-Idle Line (I 8)
Exclusive Hold (F 02)
Fax Management (I XX)
Group Calling-Ring/Page (I 7 G or I *7 G)
Group Hunt-Ring/Signal (I 77 G or I *77 G)
Group Pickup (I 66 G)
Intercom Autodial (I XX or I *XX)
Last Number Redial (F 05)
Loudspeaker Paging (I 70)
Manual Signaling (F 13 XX or F 13 *XX)
Message Light Off (F 10 XX)
Message Light On (F 09 XX)
Recall (F 03)
Save Number Redial (F 04)
Simultaneous Paging (I * 70)
Station Lock (F 21)
Touch-Tone Enable (F 08)
Voice Mail Messages (I 777)
Voice Mailbox Transfer (F 14)
F = Feature button G = Group I = Left Intercom button L = Line XX = Extension
Check Desired Features
DND
Priv
VMSCover
VIOB
1 ACE
Music
1
1,2,5 Cover-XX XX
1,2 CF-XX XX
Park
3
Pickup-XX
Drop
1 CC1
CC2
1
DLPA
DLPI
ExHold
FAX-XX
1
GCall-g
Hunt-g
P/U Grp-g
1 Ext-XX
LNR
Loudspk
1 MS-XX
4 MsgOff-XX
MsgOn-XX
4
Recall
SNR
SPage
1 Lock
TT-EN
VMMsgs-777
VMBox
PAGE
PAGE
8 of 8
1. Button with
lights is
recommended,
but not
required.
2. You can
program the
origination
extension only
or both the
origination and
destination
extension.
3. Extension
number can be
programmed as
Auto Dial
button.
4. You can
program the
extension
number.
5. Available with
ACS R2.0 or
later only.