Lucent Technologies PARTNER Advanced Communications System System Planner Manual page 24

Ext.
Jack
No. Write Name/Description
30
31
32
33
34
35
36
37
38
39
40
41
10
42
10
43
10
44
10
45
10
46
10
47
10
48
10
49
11
86
11
87
1. If checked, see Form B1, Page 4 of 4
2. If there is a mix of PARTNER-model and MLS-model phones, write "P" for PARTNER and "M" for MLS.
3. Write "T" for touch-tone or "R" for rotary. If Call Waiting is desired, check next column.
4. Must be standard phone. If immediate dialing is required, use a dedicated line. Do not assign restrictions that
prevent dialing the outside number, Forced Account Code Entry {#307}, or groups. Also see Form D, External
Hotline {#311}.
5. Standard phone is recommended. Write extension number of corresponding alert extension or "70" for loud-
speaker paging system in next column.
6. Also write Transfer Return Ext. No. {#306} on this form (usually extension 10). Also see Form B2, Identify Group
Assignments, VMS Only.
Required for PARTNER Advanced Communications System.
For additional instructions, see page 5.
Identify Telephone
Attached to this Extension
7. To prevent other extensions from interrupting calls, assign Automatic Extension Privacy {#304} on Form B2.
8. Check corresponding alert extensions in next column. To prevent outside calls, remove all outside lines–see
9. Also write Transfer Return Ext. No. {#306} on this form.
10. Available only for PARTNER ACS R2.0 or later.
11. PARTNER Voice Messaging PC Card available only with Release 1.1 or later. Virtual extension available only
* Do not connect to extension 10, 11, or the first two extensions of any 206 or 308EC module.
Form B1: System Extensions
Identify Auxiliary Equipment
Attached to this Extension
Lines/Pools Not Assigned on Form B2.
with Release 1.1 or later and used only when a PARTNER Voice Messaging PC Card is installed.
PAGE
2 of 4
Write
Transfer
Write in Return
Other Ext. No.
Equipment {#306}