Lucent Technologies PARTNER Advanced Communications System System Planner Manual page 16

Group Hunting—Ring
Rings the first available extension in the designated Hunt Group, or transfers a call
to an extension in the group. If unanswered after 3 rings, the call moves to the next
available extension, and so on, until the call is answered or until the caller hangs up.
g
= 1–6
Group Hunting—Voice Signal
Voice signals the first available extension in the designated Hunt Group, or transfers
a call to the extension with a voice-signaled announcement. The caller is connected
only if that extension answers .
Group Pickup
Picks up an intercom, transferred, or outside call ringing at any extension in the
g
designated Pickup Group. = 1–4
Last Number Redial
Automatically redials the last outside number dialed up to a maximum of 28 digits.
This feature can be used only to redial the last outside number dialed.
Loudspeaker Paging
Connects the user to the loudspeaker paging system, if one is connected to the
system.
Message Light Off
Turns off the message light on the phone at the designated extension. You can also
program an extension number on the button.
Message Light On
Turns on the message light on the phone at the designated extension. You can also
program an extension number on the button.
Privacy
Prevents other people with the same line from joining calls being conducted at this
extension. When the feature is active, the button light is on. This feature overrides
Automatic Extension Privacy {#304}.
Recall
"Recalls" a dial tone to access a PBX/Centrex feature while on a call on a PBX/
Centrex line (pressing Recall disconnects an intercom call).
g
Hunt-
g
HuntVS-
g
= 1–6
g
P/U Grp-
LNR
Loudspk
xx
MsgOff-
xx
MsgOn-
Priv
Recall
g
i77
Save Number Redial
This feature can be programmed onto more than one button. Using this feature
while on an outside call saves the number dialed into temporary memory. The
number stays in memory until a different one is saved; this feature can be used
again to redial the number at any time. (Unlike Last Number Redial, the user must
use this feature to save the number as well as to redial it; Save Number Redial lets
g
i*77
the user make other outside calls before redialing the saved number.) Account
codes cannot be saved and redialed using this feature.
Simultaneous Paging
Accesses the loudspeaker paging system and all idle system phones with speakers
g
i66
assigned to Calling Group 1.
Station Lock
Lets the user lock the extension by entering a code of four digits (0-9) on the
f05
telephone dialpad.
Touch-Tone Enable
Lets user with rotary lines access phone services that require touch-tone digits. For
i70
example, after calling a bank-by-phone service and being prompted to enter touch-
tone digits, using this feature changes the digits dialed to touch tones for the rest of
the call.
xx
f10
VMS Cover
Turns voice mail coverage for the extension on and off if PARTNER MAIL,
PARTNER MAIL VS, or PARTNER Voice Messaging is installed. When the feature
xx
f09
is active, the button light is on. This feature overrides Automatic VMS Cover.
Voice Interrupt on Busy Talk-Back
Lets user respond to voice interrupt on busy call while still active on the existing call.
f07
Voice Mail Messages
Places an intercom call to the PARTNER MAIL, PARTNER MAIL VS, or PARTNER
Voice Messaging (if available), so the user can check messages, send messages,
or administer greetings.
f03
Voice Mailbox Transfer
Transfers a caller directly to a specific extension's voice mailbox, so that the caller
can leave a message without having to first ring the extension.
14
f04
SNR
i*70
SPage
f21
Lock
f08
TT-EN
f15
VMSCover
f18
VIOB
i777
VMMsgs-777
f14
VMBox