Form B2: Customized Extension Settings - Lucent Technologies PARTNER Advanced Communications System System Planner Manual

Identify Extension Settings
if Different than Default
E NA A NA A NA NA
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
1. Write S for Spanish or F for French.
2. In Hybrid Mode only, write K for Key extension. Extension 10 always operates
as a Key extension.
3. In Key Mode, use Line Assignment {#301} to remove lines from or assign lines
to extensions. In Hybrid Mode, use Pool Extension Assignment {#314} to
remove pools from or assign pools to extensions.
4. Write IN for Inside Only or LOC for Local Only to indicate restrictions for all
outgoing calls on all lines .
5. Write list number (1–8). Also see Form D, Disallowed Phone Number Lists {#404}.

Form B2: Customized Extension Settings

Required if you want to change extension settings from defaults. For additional instructions, see pages 6 and 7.
Identify Line Ringing {CTP} Option
If Different than Default
Hybrid Mode
Only:
Write line numbers or pool access codes* in each
column to show desired Line Ringing options
Immediate
Delayed
lines
P NA
K ALL
6. Write list number (1–8). Also see Form D, Allowed Phone Number Lists {#407}.
7. Write group number (1–4).
8. Write group number (1–4). If a loudspeaker is connected and Simultaneous Paging is desired,
put appropriate extensions in Calling Group 1. Also see Form C, Simultaneous Paging.
9. Write group number (1–6).
10. Check off the same PARTNER MAIL or PARTNER MAIL VS extensions indicated on Form B1.
For the PARTNER Voice Messaging PC Card, virtual extensions 86 and 87 are automatically
assigned to Hunt Group 7.
* Pooling available only for ACS R2.0 or later.
Write line numbers or pool access codes
for Line Access Restriction {#302} or
Pool Access Restriction {#315}*
No Restriction
3
No Ring * Lines/Pools *
Outgoing Incoming
pools Not Assigned
only
Identify Restrictions/Permissions
If Different than Defaults
1 – 4 1 – 4 1 – 4 1 – 4 1 – 6 7
No Access NR
only
NA
Assignments
= Default
A = Assigned or Active
E = English
NA = Not Assigned or Not Active
NR = No Restriction
P = Pooled
{CTP} = Centralized Telephone Programming
PAGE
1 of 2
Identify
Group Assignments
NA
NA NA