Lucent Technologies PARTNER Advanced Communications System System Planner Manual page 28

Identify Extension Settings
if Different than Default
E NA A NA A NA NA
34
35
36
37
38
39
40
41
42*
43*
44*
45*
46*
47*
48*
49*
11
86
11
87
1. Write S for Spanish or F for French.
2. In Hybrid Mode only, write K for Key extension.
3. In Key Mode, use Line Assignment {#301} to remove lines from or assign lines
to extensions. In Hybrid Mode, use Pool Extension Assignment {#314} to
remove pools from or assign pools to extensions.
4. Write IN for Inside Only or LOC for Local Only to indicate restrictions for all
outgoing calls on all lines .
* Available only for ACS R2.0 or later.
Form B2: Customized Extension Settings
Required if you want to change extension settings from defaults. For additional instructions, see pages
6 and 7.
Identify Line Ringing {CTP} Option
If Different than Default
Hybrid Mode
Only:
Write line numbers or pool access codes* in each
column to show desired Line Ringing options
Immediate
Delayed
lines
P NA
5. Write list number (1–4). Also see Form D, Disallowed Phone Number Lists {#404}.
6. Write list number (1–4). Also see Form D, Allowed Phone Number Lists {#407}.
7. Write group number (1–4).
8. Write group number (1–4). If a loudspeaker is connected and Simultaneous Paging is desired,
put appropriate extensions in Calling Group 1. Also see Form C, Simultaneous Paging.
9. Write group number (1–6).
10. Check off the same PARTNER MAIL, PARTNER MAIL VS, or PARTNER Voice Messaging PC
Card extensions indicated on Form B1.
11. Virtual extension available only for ACS R1.1 or later and used only when a PARTNER Voice
Messaging PC Card is installed.
Write line numbers or pool access codes
for Line Access Restriction {#302} or
Pool Access Restriction {#315}*
No Restriction
3 *
No Ring Lines/Pools
Outgoing
pools Not Assigned
only
Identify Restrictions/Permissions
If Different than Defaults
1 – 4 1 – 4 1 – 4 1 – 4 1 – 6 7
Incoming
No Access NR
only
NA
Assignments
= Default
A = Assigned or Active
E = English
NA = Not Assigned or Not Active
NR = No Restriction
P = Pooled
{CTP} = Centralized Telephone Programming
PAGE
2 of 2
Identify
Group Assignments
NA
NA NA