Avaya PARTNER Advanced Communications System System Planner Manual page 48

®
PARTNER Advanced Communications System
Required Information Notes
Static Binding IP Links a host to an address using MAC number.
3
address
3
NAT Allows multiple LAN hosts to access the Internet behind
one public IP address.
7. Packet filtering needs
Actions to be permitted Enter rules via the IP Filtering Configuration menu.
3
or denied
IP-based servers Obtain IP addresses for all servers that require external
3
access.
supported by customer
8. Routing requirements
3
Activate RIP Optional; Only for more complex networks.
Static routing table Only used if other routers exist on the network.
3
entries
9. Bridging settings Bridging is a rare configuration that allows the 1600 DSL to support older, in-place LAN protocols, such as AppleTalk. Bridging
directs information by hardware MAC address rather than IP address.
Bridge Aging
3
Timer
Spanning Tree:
3
Enabled
Spanning Tree: Port
3
Priority
Spanning Tree: Hello
3
Time
1. Obtained from SDSL provider
2. Obtained from ISP
3. Obtained from customer/LAN VAR
®
PARTNER ACS 1600 DSL Module Planning Checklist
40
Sample values Enter values for current installation
See worksheet (if necessary)
192.168.32.33
00:c0:d5:d4:da:2c
E (to enable); D (to
disable)
See worksheet (if necessary)
Permit HTTP, Deny PING
Email 198.168.34.53
Web 198.168.121.13
Version 1 Broadcast;
Version 2 Broadcast;
Version 2 Multicast
See worksheet (if necessary)