Avaya PARTNER Advanced Communications System System Planner Manual page 22

Advanced communications system
Hide thumbs Also See for PARTNER Advanced Communications System:
Table of Contents

Advertisement

®
PARTNER
Advanced Communications System
Feature Descriptions—(Continued)
#
F
EATURE
19
Manual Signaling -
Beeps the designated extension. If the user presses
Voice
voice-signaled intercom call to the extension, or transfers a call with a voice-signaled
announcement. If on a button with lights, the lights show calling activity at the destination
extension.
20
Account Code
Allows the user to enter an account code for a call by pressing the button, entering up to 16 digits
Entry
for the account code, then pressing the button again. If on a button with lights, the lights show
when the feature is in use.
21
Background Music Turns background music on and off at the speaker of an idle system phone. If on a button with
lights, the lights show when the feature is in use.
22
Call Coverage
(ACS R2.0 or later only) Directs all intercom, transferred, and outside calls on lines assigned
ownership to the designated extension. You may program originating and covering extension
numbers on the button. If on a button with lights, the lights show when the feature is in use.
23
Call Forwarding
Forwards all calls to the designated extension. Unless Do Not Disturb is on, phone beeps once
each time a call is forwarded. You may program originating and destination extension numbers on
the button. If on a button with lights, the lights show when the feature is in use.
24
Contact Closure 1 Allows user to activate Contact Closure 1. User must belong to Contact Closure Group.
See Form D.
25
Contact Closure 2 Allows user to activate Contact Closure 2. User must belong to Contact Closure Group.
See Form D.
26
Call Park
Parks a call at your extension so it can be picked up from any other extension.
27
Call Pickup
Picks up a ringing, held, or parked call at the designated extension.
28
Conference Drop
Drops the last outside party added to a conference call.
29
Direct Line Pickup Allows the user to access a ringing, active or held call on a line that is not assigned to the
extension. Direct Line Pickup is subject to Line Access Restrictions.
31
Exclusive Hold
This feature is available only on system phones. This feature prevents other extensions from
picking up outside calls placed on hold at a specific extension with a system phone.
32
Group Calling -
Allows users to ring, page, or transfer calls simultaneously to all of the extensions in any one of
Ring/Page
four Calling Groups.
33
Group Hunt Ring/
Lets you distribute call volume among extensions in a group, to off-load call activity from a single
Signal
user.
34
Group Pickup
Allows user at any extension in the system to answer any outside, intercom, or transferred call
ringing at an extension in a Pickup Group (where G is a Pickup Group number from 1 – 4).
35
Intercom Autodial Lets telephone system place intercom calls with a single touch, by pressing a programmed button.
Form C—Extension Settings: Feature Descriptions
14
D
ESCRIPTION
i
first, pressing the button places a
0
Ext. 10
Button Light
Button Light
Only
Required
Recommended

Advertisement

Table of Contents
loading

This manual is also suitable for:

Partner

Table of Contents