Avaya PARTNER Advanced Communications System System Planner Manual page 39

®
PARTNER Advanced Communications System
Form F4: Instructions for Forced Account Codes
0
Forced Account Code List (#409)
0
If an extension has been designated for Forced Account Code Entry (#307) on Form F4, the user must dial an account code before an outside
telephone number can be dialed. Account codes, each up to 16 digits in length, can be used to associate telephone calls with a particular
department or client. Account codes print on SMDR call reports and on reports generated by call accounting packages.
If Forced Account Code verification is desired, entries must be made in the Forced Account Code List (#409). When the system verifies an account
code, it compares only the first six digits of the user-entered account code to the entries in the Forced Account Code List. For a match to be
successful, the user must dial at least the account code's associated list entry, even though the user can dial up to 16 digits for an account code.
Wildcard entries are allowed on this list.
(R3.0 or later only) Users can dial "911" without entering an account code.
Form F4: Instructions for Forced Account Codes
31