Avaya PARTNER Advanced Communications System System Planner Manual page 18

®
PARTNER Advanced Communications System
Form C: Instructions for Extensions Settings
C 2 – O
OLUMN WNER
Enter the name of the person for this extension.
C 3 – E . D
OLUMN XT ISPLAY
Enter the name you want displayed when this extension makes an intercom call.
C 4 – P S T
OLUMN HONE ET YPE
Enter the type of telephone at the extension (for example, PARTNER-34D, PARTNER-18D, or standard telephone).
C 5 – L A
OLUMN INES SSIGNED WITH
List the lines (or pool code for a pool of lines, if appropriate) that you would like assigned to each extension. For each line you enter, you have
the option of listing it as an immediate ringing line, a delayed ringing line, or a no ring line. The default option for lines is immediate ringing. (For
pools, the default option is no ringing). NOTE: Any line not listed will be removed from that extension and will not be accessible from that
extension.
NOTE: For T1 lines with Direct Inward Dialing, the ringing option is ignored, and the call rings immediately.
C 6 – C D S
OLUMN HANGE EFAULT
Language: Default = English. If you wish to display messages in a different language, write in the language. This is relevant only for
extensions with display phones.
Distinctive Ring: Default = Active. By default, outside, intercom, and transferred calls each have their own ringing pattern. To change the
default so that all calls ring the same, write "NA" (Not Active) in this column.
Abbreviated Ringing: Default = 1 ring. When a phone is in use, a new call will ring once. The line button light will continue to flash until the call
is answered.
Privacy: Default = Not Activated. By default, any user sharing a line can join calls at another extension (Privacy is Not Assigned). If all calls
are to be private, write "A" (Assigned) in this column. Always use this feature for Fax and modem extensions.
Forced Acct Code: Default = Not Activated. If a user should be required to enter an account code before placing an outside call, write "A"
(Activated) in this column.
Coverage Rings: For calls going to a covering extension the Default = 2 rings. For calls going to a voicemail box the Default = 3 rings.
You can choose between 1 to 9 rings. Enter the number of rings desired before a call is sent to the covering extension/or voicemail box. Can be
set per extension for ACS 3.0 or later. Can only be set system wide for earlier releases.
Form C: Instructions for Extensions Settings
10
R O
INGING PTIONS
ETTINGS
0