Maintenance Alarms - Lucent Technologies MERLIN LEGEND Release 6.1 System Programming Manual

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
3 Programming Procedures
Auxiliary Equipment
Console Display/Instructions
Save your entry.
Select .
Return to the System Programming menu.
Select twice.

Maintenance Alarms

Use this procedure to identify the line/trunk jack that connects an external alerting
device that sounds or flashes when major maintenance problems occur.
You cannot assign the line/trunk identified for the maintenance alarm to a button
on any telephone or as a Remote Access trunk, and you cannot use its line/trunk
jack to connect a loudspeaker paging system or Music on Hold.
Summary: Maintenance Alarms
Programmable by
Mode
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Additional Information
System Manager
All, but in Hybrid/PBX mode, the line/trunk designated for the
maintenance alarm cannot be assigned to a line/trunk pool.
Idle ConditionSystem idle
Form 2c, System Numbering: Line/Trunk Jacks
Not Applicable
Line/trunk number
No
No
Type line/trunk no.
3
3
Dial line/trunk no.
Issue 1
August 1998
Page 3-300
PC