Lucent Technologies MERLIN LEGEND Release 6.1 System Programming Manual page 729

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
3 Programming Procedures
Automatic Route Selection
Console/Display Instructions
Enter the number of digits to be absorbed ( nn = 1 to 11).
Dial or type [ nn ].
Continue to enter absorbed digits for another route number for
Subpattern B or go to Step 6.
Select .
Save your entry.
Select .
Return to the System Programming menu.
Select twice.
Other Digits
Use this procedure to specify other (extra) digits that must be added by the
system to the beginning of the number dialed by the caller, when calls are placed
on an identified route.
NOTES:
1. Pool routes must be programmed before you assign other digits.
2. In Release 6.0 and later systems where ARS calls will be made from
A maximum of 20 digits can be added, in any combination of the digits 0
through 9.
Special characters such as switchhook flash, Stop, and # cannot be included as
extra digits. Pause is allowed in every position but the first.
Other digits are assigned to Tables 1 through 18.
lines/trunks connected to a remote private network system, the local
ARS feature adds (prepends) the ARS access code of the remote
system.
Additional Information
Return to Step 3. The next route number
is displayed on Line 1.
3
Issue 1
August 1998
Page 3-551
PC