Lucent Technologies MERLIN LEGEND Release 6.1 System Programming Manual page 319

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
3 Programming Procedures
Tie Trunks
Console/Display Instructions
Enter the tie trunk number.
Save your entry.
Select .
Specify the trunk direction.
Continue to assign the direction to another trunk, or go to Step 8.
Select .
Save your entry.
Select .
Return to the System Programming menu.
Select twice.
Additional Information
Dial or type:
Trunk number [ nnn ]
Slot and port number [ sspp ]
Logical ID number
If you get the Trunk Busy message, wait for an
idle condition or exit system programming and try
again later.
xxxx = trunk entered in Step 4
is used for tandem tie trunks in
R6.0 or later systems.
Select ,
, or
.
Return to Step 6. The next trunk is
displayed on Line 1.
August 1998
Page 3-141
[ nnn ]
#
Issue 1
PC