Assigning Allowed-List Call Restrictions - AT&T MERLIN 3070 Administration Manual

Assigning Allowed-List Call Restrictions

Once you have created an allowed list, you can assign it to any voice terminal. Follow
the procedure below to assign allowed-list call restrictions.
1.
If you have not already done so, enter administration mode by follow-
ing the boxed instructions on page 25.
Touch Adm Misc.
2.
The lights next to the administration mode buttons stop flashing, and the
green light next to Adm Misc remains on.
3. Dial the 2-character code #4.
4.
Dial the number of the list (0 through 7) that you want to assign or
reassign to voice terminals.
Green lights come on next to the Auto Intercom buttons for all voice ter-
minals that can access the allowed list.
When you first set up your system, no terminals are able to access any
list.
5. Touch the Auto intercom button for each voice terminal whose status
you want to change until the correct code is showing.
Green light on = terminal can access the numbers in the list
Green light off = terminal cannot access the numbers in the list
Repeat steps 3 through 5 for each allowed list that you want to assign
6.
to voice terminals in your system.
7.
Touch Adm Misc.
The lights next to the administration mode buttons flash again.
8. Continue to administer your system, or leave administration mode by
following the boxed instructions on page 25.
45