AT&T MERLIN 3070 Administration Manual page 31

With feature module 4
Hide thumbs Also See for MERLIN 3070:
Table of Contents

Advertisement

30
6. Repeat steps 3 through 5 for each voice terminal to which you want to
assign lines.
NOTE: If you are setting up a customized square system, try to admin-
ister groups of voice terminals that share the same line assignments
at the same time. If you plan to assign a personal line to a voice terminal,
be sure not to assign the line to any voice terminals that should not have
access to that line.
You can use the shortcut below to give another voice terminal the same
line assignments as one you have already set up. This procedure is
especially timesaving if you have a standard square system, since all
your voice terminals will have the same line assignments.
NOTE When you copy line assignments, you also copy restrictions and
allowed-list permissions.
Dial the intercom number or touch the Auto intercom button of the
new voice terminal.
Touch Copy.
Dial the intercom number or touch the Auto intercom button of the
original voice terminal.
7. Touch Adm Tel.
The lights next to the administration mode buttons flash again.
8. Continue to administer your system or leave administration mode by
following the boxed instructions on page 25.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Merlin 1030

Table of Contents