Programming Voice Announcement Disable - AT&T MERLIN 3070 Administration Manual

PROGRAMMING VOICE ANNOUNCEMENT DISABLE

When your system is installed, all voice terminals can receive either announced or
ringing intercom calls. However, some people may not want their intercom calls
signaled by a voice announcement- For some voice terminals, such as those in public
locations, voice announcements may be impractical. Using Voice Announcement
Disable, you can program voice terminals to block intercom voice announcements.
As a result, all intercom calls to those voice terminals ring, even if the callers try to
place an announced intercom call. Use Centralized Voice Terminal Programming
or follow the procedure below to program this feature.
1. Go to the voice terminal you want to program.
2. Slide the T/P switch on the left side of the voice terminal to P.
The voice terminal rings every 5 seconds to remind you it is in program
mode.
3. Touch the lntercom-Voice button successively until the green light next
to it shows the appropriate code. Each successive touch gives you one
of these codes:
Steady green on = voice announcements permitted
Green off = voice announcements blocked
4. If you have more features to program on this voice terminal, you can
do so. Otherwise, slide the T/P switch to the center position to return
to normal operation.
81