Users - Adding Or Modifying; Users - Removing - Lucent Technologies CentreVu Release 3 Version 8 High Availability User Manual

User Scenarios
Users - Adding
or modifying
Users -
Removing
To administer a new user on the CMS High Availability system, add the
new user on the Primary CMS server. Then restore this new data to the
3
Secondary CMS server.
1. Add user(s) via User Data on the Primary CMS server (for details
see Assigning User Data , Chapter 9 in: CentreVu® CMS
Administration, 585-210-910).
2. Add user(s) Permissions on the Primary CMS server (for details,
see Assigning User Data , Chapter 9 in: CentreVu® CMS
Administration, 585-210-910).
3. Do maintenance backup of CMS system administration data and
ACD-specific administration data on the Primary CMS server (for
details, see Running a Maintenance Backup , Chapter 11 in:
CentreVu® CMS Administration, 585-210-910).
4. Log in to the Secondary CMS server and change to single-user
mode.
5. Do maintenance restore of CMS system administration data and
ACD-specific administration data on the Secondary CMS server for
all ACDs (for details, see Running a Restore , Chapter 11 in:
CentreVu® CMS Administration, 585-210-910).
6. Change the Secondary server back to multi-user mode.
7. Log off the secondary server.
NOTE:
Maintenance restore of CMS system administration data replaces the
user data, and generates a UNIX login and a user directory for logins that
are on the backup tape. Maintenance restore of ACD-specific
administration data replaces the user permissions. CMS user passwords
must be administered separately on each CMS server (see
Setting User Passwords", below).
To remove CMS users:
1. Delete the user(s) from the Primary CMS server.
3
2. Delete the same user(s) from the Secondary CMS server.
CentreVu CMS R3V8 High Availability User Guide
3-20
"Users -