Setting Up The Calibrator; Using The Strap And Bail - Fluke 744 User Manual

Setting Up the Calibrator

Using the Strap and Bail

After you unpack the calibrator, attach its carrying
strap as shown in Figure 8. You can adjust the strap
as necessary to hang the calibrator on any sturdy
Figure 8. Using the Bail and Installing the Strap
Documenting Process Calibrator
support. Figure 8 also shows you how to open the
bail to stand the calibrator at a comfortable viewing
angle for benchtop use.
Setting Up the Calibrator
gj8f.eps
19