Fluke 744 User Manual page 49

OK
Figure 14. Using a Jumper Correctly
8. If necessary, you can change between C or F
WRONG
9. If necessary, you can change between
gj14f.eps
Documenting Process Calibrator
temperature units in Setup mode as follows:
a. Press .
b. Press the
Next Page
c. Use the and keys to move the cursor
to the parameter you which to change, then
press or the
choose a setting for that parameter.
d. Press or to move the cursor to the
desired setting.
e. Press to go back to the
f. Press the softkey or
Done
mode.
IPTS-68 Temperature Scale
procedure is the same as steps a through f
above.
Using Measure Mode
softkey twice.
softkey to
Choices
display.
to exit Setup
or
ITS-90
in Setup mode. The
39