Fluke 744 User Manual page 12

744
Users Manual
The ability to automatically log up to 8,000 data
points.
A serial computer interface for
uploading/downloading tasks, lists, and results.
Automatic calibration procedures for
transmitters and limit switches using split screen
MEASURE/SOURCE mode.
Transmitter mode in which the calibrator can be
configured to emulate the functions of a process
instrument.
Built-in calculator with square-root function, and
accessible registers containing measure and
source values.
An optional bar code wand for entering
alphanumeric characters.
Measuring features:
Damping (smoothing of the last several
readings), with display indicator of damped
status.
Display of measurements in engineering units,
percent of scale, square-law inputs, or custom
units.
2
The ability to capture and display minimum and
maximum measured levels.
Sourcing features:
The ability to set source values to engineering
units, percent of scale, square-law outputs, or
custom units.
Manual and automatic stepping, and an output
ramp feature for testing limit switches. Trip
detect is either a 1 V change or a continuity
status change (Open or Short) from one ramp
increment to the next.
For performance testing and calibration instructions
order the 74X Series Calibration Manual
(PN 602505).
To contact Fluke, call:
USA and Canada:
1-888-99-FLUKE (1-888-993-5853)
Europe: +31 402-678-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-356-5500
Or visit us on the World Wide Web: www.fluke.com