60 Hz Tracking
60 Hz tracking is used to adjust the 60 Hz by sychronious signals
Highlight 60 Hz Tracking by pushing the control disk up or down and
press ENTER.
When 60 Hz Tracking is selected in the Service Mode selection
menu, the following warning will be displayed :
60 Hz Tracking is reserved to qualified service personnel.
If you are not qualified, press EXIT to cancel the 60 Hz Tracking.
5975288 BARCOGRAPHICS 8200 110497
Service Mode
SERVICE
PANEL ADJUSTMENTS
PRESET INPUT BALANCE
60Hz TRACKING
I2C DIAGNOSIS
MORE...
Select with
or
then <ENTER>
WARNING
<EXIT> to return.
60 Hz TRACKING
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
13-15