Table of Contents
Advertisement
Some items in the Adjustment mode are password protected. While selecting such an
item, the projector asks to enter your password (Password protection is only available
when the password strap on the controller module is ON, see 'Change password' in
chapter 'Service mode'.
Your password contains 4 digits.
Enter the digits with the numeric keys.
Example : 2 3 1 9
The first digit position is highlighted. Enter with the numeric keys. The highlighted
square jumps to the next position. Continue until all 4 digits are filled in.
When your password is correct, you get access to the selected item.
When your password is wrong. The error message "Invalid password" is displayed on
the screen. Press ENTER to continue and to return to the Service menu.
Factory programmed password : 0 0 0 0
Once the password is correctly entered, all other password protected items are
accessible without re-entering your password.
When re-entering the Adjustment mode, it will be nessary to enter your password again
when selecting a password protected item.
5975288 BARCOGRAPHICS 8200 110497
Start Up of the Adjustment Mode
PASSWORD
ENTER PASSWORD
----
Use numeric keys
<EXIT> to return
Error
Invalid password
<EXIT> to return
9-3
Advertisement
Table of Contents
