Table of Contents
Advertisement
Installation Guidelines
* How to install a projection lens?
The BARCOGRAPHICS 8200 is supplied without any lens.
The following lenses are available as an option :
HD(1.2:1)
HD(2.2:1)
HD(3.3:1)
HD(4.0:1)
HD(5:1)
HD(7:1)
HD(1.5-3:1)
HD(3.0-5.3:1)
WHD(3.5:1)
How to install the lens by the BARCOGRAPHICS 8200?
Remove the foam rubber in the opening of the lens holder.
- Take the new lens out of its shipping carton and remove the lens
covers.
- Turn the lens into the lens holder by turning clockwise.
- Focus the lens (see appendix C) and secure the correct position
with the fastener ring by turning this ring clockwise.
* How to install the projector?
Ceiling mount or table mount?
To install the BARCOGRAPHICS 8200, it is recommended that the
BARCO mounting kits which are specially designed for this function
be used at all times.
3-6
BARCO ceiling support.
Order number : R9829620 or R9829621
Always use the BARCO ceiling support to attach your
BARCOGRAPHICS 8200 to the ceiling.
The installation instruction for this support is enclosed in the packet
of the set. You can order these instructions also from BARCO.
BARCO projection table.
BARCO's projection table provides adjustable height and offers a
stable surface for the projector
Order number R9827740.
5975288 BARCOGRAPHICS 8200 110497
Advertisement
Table of Contents
