Options
Highlight Options by pushing the control disk up or down and press
ENTER. The Geometry Options menu will be displayed.
The next question will be asked by the projector :
'Use the same side keystone correction for all files ? [YES] or [NO].
[YES] : the same keystone correction will be used for all installed files.
[NO] : the keystone has to be adjusted file per file.
Push the ENTER key to toggle between [YES] or [NO].
Press EXIT to return to the Geometry menu.
5975288 BARCOGRAPHICS 8200 110497
Random Access Adjustment Mode
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Select with
or
then <ENTER>
GEOMETRY OPTIONS
<EXIT> to return.
Use the same side
keystone correction
for all files ?
[YES]
<ENTER> to toggle
<EXIT> to return
11-21