Side Keystone - Barco R9001330 Owner's Manual

Random Access Adjustment Mode

Side keystone

GEOMETRY
Highlight Side Keystone by pushing the control disk up or down and
SHIFT
press ENTER to select.
SIZE
SIDE KEYSTONE
BLANKING
The side keystone adjustment is used to align the image if the
OPTIONS
projector is mounted as a non standard projection angle.
Select with or
then <ENTER>
<EXIT> to return.
Push the control disk to the right or to the left to adjust the keystone
of the image.
When the upper part of the image is wider than the lower part of the
image, push the control disk to the left. The number indication below
the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the
image, push the control disk to the right. The number indication
below the bar scale will be positive.
5975288 BARCOGRAPHICS 8200 110497
11-18