Barco R9001330 Owner's Manual page 48

RGB input selection :
Key in the corresponding slot number on the RCU or the local
keypad.
Straps on module level :
Floating or non-floating input.
Red : J3 : strap "yes" : non floating
Green : J4 : strap "yes" : non floating
Blue : J5 : strap "yes" : non floating
H/C : J6 : strap "yes" : non floating
V : J7 : strap "yes" : non floating
Factory preset : strap "yes", non floating input
Sync selection : strap on module level.
J8 : see drawing
Factory preset : separate sync.
Sync selection on the Input Slots menu.
The horizontal sync input can be set as separate sync input or as
separate sync + video input. To change this setting, press ADJUST
or ENTER key to start up the Adjustment mode..
5975288 BARCOGRAPHICS 8200 110497
strap "no" : floating
strap "no" : floating
strap "no" : floating
strap "no" : floating
strap "no" : floating
J 8
Sync selection
Separate sync
J4 J5
J6
J3
Non-Floating
Floating
Floating or non floating input
Connections
S y n c o n g r e e n
J7
7-7